Networking
79
VGA Grid User Guide
6.
The recording will then be uploaded to the configured remote path using
the configured client.
7.
Check the server to confirm that the most recently saved video file has
been uploaded to it and it is in the proper path location on that server.
If the file is not uploaded, verify that the client configuration and Automatic File
Upload configuration settings are correct. Check the remote device’s root path, if
the remote path is incorrectly configured, the file will be uploaded to that location.
Check the Files Archive section in the
Channel
menu point from the Web admin
interface:
If the
Remove after upload
checkbox is selected, the uploaded file should have been
deleted from the Archive section. If the
Mark file as downloaded
checkbox is
selected, the uploaded broadcast file download icon should be
.
10
Networking
Changing the network configuration involves setting how the VGA Grid receives an
IP address. IP addresses can be assigned statically or dynamically with the use of a
DHCP server. For network configuration changes to take effect, the System device
must be rebooted after making the changes
,
refer to the section Rebooting or
If the IP address is changed, the VGA Grid must be removed from the Network
Discovery Utility and then re-discovered by selecting
Search
.
Additionally, the System’s MAC address is displayed on the Network Configuration
page. Providing the MAC address to your network administrator may be helpful for
managing your network.
10.1
Connecting Directly to the VGA Grid Concentrator
This section discusses how to directly connect to the VGA Grid Concentrator using
the factory default network settings. This method must be used if the network
where the Concentrator resides does not have a DHCP server, or it is desired to
simply connect a controlling computer and the Concentrator without a router, by
simply using a direct connect Ethernet cable.