Physical Attributes
10
VGA Grid User Guide
Table 2
Summary of the Front Panel's connectors and Indicators
Number
Name
Description
1, 2
Not Used
3
Power and
Capture LEDS
Red LED:
during operation the red LED blinks each time
the VGA2Ethernet captures an image. You can use the
red LED as an indicator that the VGA2Ethernet is
capturing images.
Green and blue LEDs
: when the VGA2Ethernet device
first starts up, the blue LED lights up. A few seconds
later the green LED lights up. After about another 20
seconds the blue LED turns off, leaving the green LED
on indicating that the VGA2Ethernet has started up and
can start capturing images. During operation the blue
LED blinks during video signal test operation and when
the system tunes video parameters (e.g. VGA
parameters)
4
Audio Out
Connects audio equipment, such as headphones or
speakers, to confirm whether the audio stream is
currently being captured by the VGA2Ethernet.
5
DVI Out
Used to verify and confirm that the connected video
source from DVI In port is being received. A DVI
monitor or projector can be used with this port using
the DVI to DVI cable. Alternatively, if the device to be
used to confirm the receiving DVI input signal is a VGA
monitor, use the DVI to VGA cable.
6
Audio In
Connects a microphone or audio source. The input can
be mic or line.
7
DVI In
Connects a DVI source to the VGA2Ethernet using the
included DVI cable. To connect a VGA source, use the
included VGA to DVI adapter. To connect an HDMI
source (non-copy protected content) use the included
HDMI to DVI adapter.