Epic Red Epic-M, Operation Manual, Page: 193 / 228

Version 3.0
955-0002_v3.0, Rev-B
COPYRIGHT © 2012 Red.com, Inc.
191
CHARGING
CHARGE TIME
A fully discharged REDMOTE battery will be fully charged in approximately 6 hours.
USING CAMERA
While connected to the camera, the REDMOTE will automatically recharge its internal battery. Charge
status is indicated by the Green Battery Icon at the top-right of the REDMOTE LCD display screen. A
fully discharged REDMOTE battery will be re-charged in approximately 6 hours if connected to a
powered camera or a USB based power source such as laptop P.C.
USING USB CONNECTOR
The REDMOTE can be charged by connecting the RED Mini-USB-to-USB cable (790-0230) between
REDMOTE and a computer or a cell phone charger.
NOTE: The REDMOTE can be charged using the Mini-USB connector while connected and controlling a
camera wirelessly.
NOTE: If the computer / cable / hub do not provide enough voltage, the REDMOTE will not charge
and show an "Error Charging" message.
1. Connect the USB connector to any computer (computer must be ON to charge REDMOTE).
2. Connect the Mini-USB end to the REDMOTE USB Port located on the lower right side (under rubber
protective cover).
3. If the REDMOTE is powered down (and paired camera is OFF), the REDMOTE will power UP, display
STARTING UP, display SEARCHING (with flashing Green LED), then settle into IDLE mode.
4. Green battery indicator will blink, indicating REDMOTE is charging.
5. A fully discharged REDMOTE battery will be fully charged in approximately 6 hours.