Epic Red Epic-M, Operation Manual, Page: 127 / 228

Version 3.0
955-0002_v3.0, Rev-B
COPYRIGHT © 2012 Red.com, Inc.
125
Group names (like camera Names) can be used to uniquely address commands to a specific group of
networked cameras. Note: the group name is limited to 8 characters, default name is DEFAULT.
When Group is selected the following keyboard will appear.
TARGET
Using TARGET the user can specify if this camera can send commands to ALL devices on the network,
to NONE of the devices on the network (meaning the camera will only listen to messages and not
originate messages) or to a specific TARGET device - which can either be the NAME of a specific
camera or device or a name of a GROUP of cameras or devices.
This structure allows for a lot of flexibility. For example on a multi-rig 3D shoot the user can either send
commands to an individual camera (e.g. Set CAM_A_L to 1/48th exposure), to a group of cameras (e.g.
Set "3DRIG_A" to 48 FPS), or to all cameras (e.g. Start Recording on all cameras). It is important to note
that with the exception of the NONE setting, all command filtering is happening on the receiver side of
the communication link.
When selected a keyboard will appear.