EPE EPS-2000 Series, Owner'S Manual

Page: 62 / 455

Owner’s Manual
Masking Time
Display
The EPS Monitor expects three digits to be
entered
the keypads. As
enter your be
on the tight of the LCD.
Enter number
Charge Masking represents time in
the Charger applying Boost
to the batteries Main AC
power is restored. The time is select-
able in 15 second increments.
Boost
Press: Display Reads:
The EPS Monitor expects to be
the numbered keypads. As
the numbers, your entry be displayed on
the of the LCD.
Enter the number as the procedure.
THE SELECTED CHARGING CURRENT MUST
COMPLY
WITH
THE BATTERY
MANUFACTURER’S SPECIFICATION.
voltage
Press:
Display Reads:
EPS Monitor expects three digits to be
entered the keypads. As you
enter your will be displayed
on the right of the LCD.
Enter the number as in procedure
Only of the nominal output volt-
age be entered. Use the numbered key-
pads to the new value. than press the
ENTER For a VAC system, for
example. the new must be the
202 214 VAC. For a VAC
the new value be the range
II you select value these range
the