EPE EPS-2000 Series, Owner'S Manual

Page: 327 / 455

a. Fans (blowers)
b.
Multi-wire cables, cables
c. 64 pin ribbon cables
d. for multi-wire cables and 64
cables
DC banks
f. DC shunts
Input and output
Bypass surge protector network resistors
Note:
Although most parts are interchangeable between Phase
II and Phase I, it is recommended to maintain the same part
to part replacement within the Phase version.
Note:
The DC capacitor assemblies must be replaced if
converting from I to Phase II DC caps. (including the
mounting base plate). The caps are taller and of a smaller
diameter, and cannot be substituted individually or via 4
pack subassembly.
6 .
Mechanically, the Phase II is almost identical to
iii ii
a. DC capacitor bank(s) mounting.
b. PCA wiring.
C. Attached are the following drawings for use with the
Phase
II
version:,
NO.OF
ITEM.
l -
DESCRIPTION
NO.
REV
- -
1.
2.
3.
4.
5.
EPS-2000,
F I L U
Phase
II,
System Schematic
NC 2
PCA Assembly (High Voltage
C 1
Fused Interface), Phase
II
PCA Schematic (High Voltage 671916220
C 4
Fused Interface), Phase
II
Component Location Drawings
a. 20 KVA, M.G. Switches
NC
b. 40 KVA, M.G. Switches
04-45080-02
NC
c. 60 KVA, H.G. Switches
04-45080-03
NC 1
d. KVA, M.6. Switches
04-45080-04 NC 1
EPS-2000 Phase
II,
New Components/
A
Assemblies Parts List