EPE EPS-2000 Series, Owner'S Manual

Page: 275 / 455

EPS 2000 11 UPS
To remove PCA, four additional screws (two on the top and two on the bottom the
the
card
The sequence is reversed when installing PCA.
4.5
Battery Maintenance
Refer to the Battery Safety Instructions in 4.1. The individual mounted
battery trays, two batteries to tray. The battery are secured to a battey
incorporated into the enclosure frame. A folding bracket is provided (see Figure 14) that is used
to hold the battery trays in accessible position inspection and maintenance..
Battery Bracket
When not is use. the bracket is disassembled (Figure and the
battery (front view. see Figure To assemble the bracket:
2. Assemble the bracket shown hardware
in 1. above. Note that the bracket can be reversed to
allow the assembly to be used trays rests the
3. the bracket in the battery rack slot underneath the battery tray
to inspected (see Figure
Batteries should be inspected twice year; often used ditty or
temperature location. Keep batteries. posts. and inter-battery build-up.
4.5.2 Battery Inspection
Perform the tallowing battery year:
Inspect the batteries in the EPS UPS for leakage or seepage.
and signs of battery container cracks. etc.
If conditions are noted. the must be replaced.
2. Keep interior and exterior of the EPS and the exterior surfaces
battery. tree all foreign materials including dust.
A clean. dry cbth should be used to clean battery mild and
water can be used. Be sure to all Never use