EPAX ROPAX RPM 7700 VII, Original Operating Manual, Page: 53 / 76

53
7.6 The electric drive
You have the option of operating the compaction mode independently from the diesel
engine. An electrical connection (CEE 32 A) is located on the side for this purpose.
To connect the Jumbo Mobile Compactor to the local power supply, proceed as follows:
1) Park the Jumbo Mobile Compactor in front of a container (see chapter 5.5.1).
2) Check that the mains voltage matches the machine voltage.
For the machine voltage, refer to the adhesive label next to the mains plug.
If the voltages match, you can connect the machine to the electrical mains.
3) Release the EMERGENCY STOP button.
4) Push back the sliding switch on the joystick (roller operation).
5) Press the RELEASE key.
A yellow indicator light on the operating keyboard signals
that voltage is applied.
The diesel engine can no longer be started.
6) The Jumbo Mobile Compactor can now start the compaction process.
For further information, please refer to chapter 5.5.2.
7.7 The wheel position display
A display can be installed in the control panel to
show the position of the drive wheels.
In the 0 position, the Jumbo Mobile Compactor
moves straight ahead.
If the indicator is on the max. marker, the wheels
are turned to the left or right by approx. 45°.
Electrical connection
7. 04