41
5. 10
7) To change the container or move the
Jumbo Mobile Compactor, first lift the roller.
To do so, proceed as follows:
*
Push the joystick forward/backward until
the roller and the pendulum arm are in a
perpendicular position in the container.
Return the joystick to its center position
and press the yellow or green button
(roller stops).
*
Press the green "raise" button on the
joystick and hold it until the hydraulic
cylinder moves beneath the cranked arm
and lifts the roller up to thestop.
Only raise the roller
when the pendulum arm
is in a perpendicular
position to prevent the
roller from swinging.
8) Now turn off the diesel engine by turning
the ignition key (3) clockwise.
To avoid engine
damage, let the engine
idle for a short time
(15-30 seconds) before
turning it off.
When leaving the machine, ensure that
the driver's cab and all doors and windows
are locked.
forward
backward
green and
yellow button
3
Cranked arm
Pendulum arm
90°
Compaction roller
Summary of Contents for ROPAX RPM 7700 VII
Page 63: ...63 11 01 Figure standard design actual design may differ...
Page 76: ......