28
4.3.3 Adjusting the driver’s seat
Danger of accidents due to distraction! Do not adjust the driver’s seat while driving, but
only while the Jumbo Mobile Compactor is not moving!
You can adjust the driver’s seat to your size and posture as required. This prevents muscle tension and
fatigue during work.
Adjust the seat so that you can comfortably reach the levers, while your back makes contact with the back
rest.
The following seat adjustments are possible:
1. Lengthwise adjustment
Make the lengthwise adjustment by ‘pulling up’ the locking lever. After the adjustment, ensure that the lever
engages in the desired position. Ensure that the driver’s seat can no longer be moved after completing
the adjustment.
2. Weight adjustment
Adjust the weight while the seat is subject to load. Push down the setting handle and adjust the seat to
the driver’s weight on the scale. To change the setting to a lower weight, push the setting handle down to
the stop. The setting handle now automatically moves up to the lowest weight. Now you can adjust the
weight again.
3. Back rest adjustment
Adjust the back rest by ‘pulling up’ the locking lever. Now slide the seat forward or backward until you have
set the back rest to the desired angle. Ensure that the locking lever engages in the desired position. Ensure
that the back rest can no longer be moved after locking.
4. 03
Summary of Contents for ROPAX RPM 7700 VII
Page 63: ...63 11 01 Figure standard design actual design may differ...
Page 76: ......