44
6. 03
6.2.1 Adjusting the running time on the display
1) Start the diesel engine as described in section 5.1.
2) Ensure that the sliding switch on the joystick is in its center position (automatic
parking brake active).
3) Open the door (on the RH side in the driving direction) to the interior of the
Jumbo Mobile Compactor.
The switch cabinet is located here.
4) Open the switch cabinet.
5) Press the OK button on the PLC control system.
6) Use the + and - buttons to set the desired running time.
7) Press the OK button to confirm your input.
8) Close all doors and lock them with a key.
Keypad
Output
Display
Connection for
Eeprom
Input
Mains voltage
Ready for operation!
Running time % % % % Sec.
BSZ 00000
W 00000
SW 174 MJ V202
Fig. display
Operating status
Running time
Operating hour counter
Software version /
program number
Operating hour counter
Roller
Summary of Contents for ROPAX RPM 7700 VII
Page 63: ...63 11 01 Figure standard design actual design may differ...
Page 76: ......