30
4.4 The travel path adjustment
1) Release the EMERGENCY STOP
button by turning it clockwise.
2) Start the diesel engine as described in
section 5.1.
3) Push forward the sliding switch on the
joystick (automatic parking brake is
deactivated, driving mode is active).
To drive the Jumbo Mobile
Compactor, ensure that the
roller is completely raised.
4) Move the Jumbo Mobile Compactor to
a position adjacent to a container, as
described in section 5.2
5) Push back the sliding switch on the
joystick (automatic parking brake is
active, roller mode is active), press
the release button and press the
yellow button to lower the roller into
the container.
6) Fill the container with approx. 500 mm
of material.
7) Use the joystick and the push button
TRAVEL LENGTH SETTING to set the
travel length.
8) Turn the selector switch "Container
1-2-3", e.g. to position "1” (additional
equipment).
4. 05
Sliding switch
Driving mode
Sliding switch
Roller mode
Travel path adjustment
Summary of Contents for ROPAX RPM 7700 VII
Page 63: ...63 11 01 Figure standard design actual design may differ...
Page 76: ......