REVELATION
Ⅱ
REVELATION
Ⅱ
Alkaline Water Ionizer
Alkaline Water Ionizer
You will need at least an 18 volt drill with a 1
¼
inch ingrader arbor attached
to a 1
¼
inch carbide saw. Attach the ingrader arbor to the drill and tighten,
then attach the carbide saw to the ingrader arbor.
Next, select a location for the hole, not too far away from your sink and then
drill the hole.
2. Next, unscrew the stainless steel clamp from the REVELATION
Ⅱ
faucet.
You will see exposed rivets. Now insert the REVELATION
Ⅱ
faucet into the
drilled hole.
①
②
③
④
⑧
⑨
Installing the REVELATION
Ⅱ
Base:
Installation Instructions
21
⑥
Alkaline Water
⑤
Water Inlet
⑦
Acidic Water
Already installed
How to use your REVELATION
Ⅱ
:
1) Turn the water on from your cold water line. Adjust the water flow with your cold water line
diverter valve water flow control handle. The halfway position is ideal.
2) Press the water “on” button on the front of the REVELATION
Ⅱ
.
The first time you use your REVELATION
Ⅱ
, it will run a cleaning cycle. The screen will turn
red and chimes will sound for about thirty seconds. Afterwards, the water will automatically
shut off.
3) While the cleaning cycle is running, look at the screen and locate the water flow in liters per
minute. Verify that the water flow is between 2.0 and 2.5 liters per minute. If it isn't, then adjust
the flow rate with your cold water line diverter valve water flow control handle.
If there is too much water pressure on the REVELATION
Ⅱ
, no water will be released through
the machine until you turn it down. Also, if there is not enough water pressure (less than one
liter per minute), the REVELATION
Ⅱ
will be unable to ionize the water.
4) Next, choose the alkaline or acid water level that you want and press the water “on” button.
To turn the water off, press the water “off” button. Do not turn the water off with your diverter
valve while the REVELATION
Ⅱ
is on. If you do, you will see an error message called
“check” and the icon of the wrench will blink, telling you that your REVELATION
Ⅱ
is
waiting for water to ionize, but you have shut off the water that it needs. So, again, be sure that
you turn the water on and off with the water “on” and “off” button on the front of the
REVELATION
Ⅱ
.
Using your REVELATION
Ⅱ
24