REVELATION
Ⅱ
REVELATION
Ⅱ
Alkaline Water Ionizer
Alkaline Water Ionizer
Unpacking Your REVELATION
Ⅱ
:
Inside the REVELATION
Ⅱ
Box
- REVELATION
Ⅱ
General body / REVELATION
Ⅱ
Faucet
- Hardware box containing installation parts and accessories
- REVELATION
Ⅱ
user's manual
- pH drops
- Dust Filter
-
Water Pressure Reducing Valve
-
Power Cord
-
Cold Water Line Diverter valve
- 1/4” white water tubing- to be cut to desired length during installation.
-
5/16” white water tubing- to be cut to desired length during installation.
Installation Tips:
-- Be sure to only supply clean quality water to the REVELATION
Ⅱ
.
--Do not hook it up directly to a well, lake, river, etc. without consulting your
authorized dealer.
--Do not supply the unit with ionized water.
--Do not use well water, groundwater, contaminated water, and water contained
with high amounts of heavy metals before speaking to your authorized dealer.
--Do not dispense contaminated water to this product. Tap water is best.
--Remember to test your water once per month for pH using the supplied pH test
drops.
Installation Instructions
18
Programming the REVELATION
Ⅱ
3. Automatic Cleaning Option
Touch the
“ACIDIC(>)”
sensor ONCE.
“CL”
flashes on the display. This sets how often the automatic
cleaning operates.
Leave as programmed.
4. Filter #1 Life Reset Option
Touch the
“ACIDIC(>)”
sensor ONCE.
“Filter #1 icon”
flashes on the display. Switching this option to
“ON”
will reset filters
#1.
5. Filter #2 Life Reset Option
Touch the
“ACIDIC(>)”
sensor ONCE.
“Filter #2 icon”
flashes on the display. Switching this option to
“ON”
will reset filters
#2.
You are done! Continue touching
the
“ACIDIC(SET)”
button to exit programming.
Note:
When you make any adjustment to an option in the mode you must hit
“ACIDIC(SET)”
to save the changes you made. If you want to change another option in the mode, you must go
back into it by pressing the
“ALKALINE”
button
and
“PURE”
button
for five seconds, then
hitting the
“ACIDIC(>)”
button until the option you want to change is displayed. Then, after
you make your changes, you must touch SET again.
Tip:
If you adjust the overall ionization strength of the REVELATION
Ⅱ
in step 6, it will
change
all of your pH and ORP values to their default setting. So, if you want to also fine tune each pH
and ORP value for the four alkaline settings, you must enter the “mode” again, adjust these
values, then hit “set” to save your changes. You cannot adjust multiple options at the same time.
You must reenter the “mode” each time.
27
