13
EN
600
194
Assembly of the water tank near the oven
Water tank
Evaporator
Initially select a fixing option according to
(Fig. 3 - Fig. 5)
This applies to the sauna ovens
Type Bi-O
Cubo.
Fig. 3
Fig. 4
Fig. 5
Fig. 6
•
Drill the fixing holes Ø 3.4 mm according
to the sizes in fig. 6
•
Screw the water tank onto the rear wall
using the 2 4.2x 9.5 self-tapping screws
provided.
•
Now install the float valve into the tank.
Ensure that the float makes a vertical
movement and does not contact the
tank wall.
•
Make the connection between the water
tank and vaporiser according to fig. 2 and
fig. 6.
•
There is a 3/4” thread on the float valve
output From here you can now connect
your supply line individually to the fixed
water connection.
Please observe:
A shut-off valve must be installed be
-
tween the mains and the fixed water con
-
nection. If the fixed water connection is not
used for a longer period of time, the shut-off
valve should be closed.
Caution: operating pressure 3 - max.
10 bar.
Double nipple
T-joint
Befestigungsmöglichkeit: Wand
Befestigungsmöglichkeit: Wand
Befestigungsmöglichkeit: Ofenschutz-Gitter
Attachment option: heater
Attachment option: wall
Attachment option: protective grating
Reinforced hose
Protective grating
for heater
Water tank
Evaporator
Water tank
Evaporator
Water tank
Fixed water
connection
Shut-off valve
Bleeder
Water level approx.
1/2 tank height
