background image

23

EN

stallation or set-up in a niche, under a 
bench or under a sloping roof.

• 

Do not put the sauna heater into operation 
when the air intake is closed.

• 

The cabin lighting and the corresponding 
installation must correspond with the 
"splash protected" version in accordance 
with DIN EN VDE 0100 T 703. Therefore, 
only VDE-tested sauna light with max. 40 
Watt may be installed in connection with 
the sauna heater. 

• 

 Only a locally certified electrician 

may connect the sauna facility (sauna 
heater, control unit, lighting etc.) to a fixed 
mains connection.

• 

All electrical installations and all connec-
tion lines that are installed inside the cab-
in must be suitable for an ambient tem-
perature of at least 170 °C. If single-wire 
cables are used as connection lines, they 
must be protected using a flexible metal 
tube connected to the equipment ground-
ing conductor. Please see the table for the 
minimum cross-section of the connection 
cable and the suitable cabin size in rela-
tion to the power input in kW.

• 

When installing the sauna heater, please 
ensure that the vertical clearance be-
tween the sauna heater upper edge and 
the sauna ceiling is maintained. Please 
see also the dimensions diagram for the 
clearance between the lower edge of the 

sauna heater and the floor. On heaters 
with bases, this clearance is maintained 
via the base or legs of the device. 

• 

Please always ensure that the sauna heat-
er is never placed on flooring made of 
flammable material (wood, plastic floor-
ing etc). Ceramic tiles are recommended 
as floor materials.

• 

Floor heating in the sauna cabin increases 
the surface temperature of the flooring.

• 

Please see the dimensions information 
for the respective sauna heater for the 
clearance between the heater protective 
grating or the bench and other flammable 
materials. The heater protective grating 
must roughly accord with the front height 
of the sauna heater.

• 

Please also observe the information and 
instructions provided by the cabin manu-
facturer.

• 

 Please take precautions when 

cleaning components with sharp edges.

• 

Upright heaters need to be fitted on site 
with elements that prevent them from 
overturning.

• 

 Attention:

 Pour the infusion water 

only on the sauna rocks and never any-
where else.

• 

When using your sauna in a dry 

Finnish mode never add sauna essences or 

Summary of Contents for Bi-O Cubo



















Reviews: