UM-ITAG4-160217 REV.D
Auto Start
Device automatically starts recording on the specific date/time preset, no need to press
Start/Stop
button after configuration.
Button Settings
Disable Stop Button
This option is used to avoid mistaken Stop Button action, once enabled, device could not be
stopped by pressing
Start/Stop
button, recording stops when logging cycle completes, however,
you are still allowed to stop recording through TempCentre.
Alarm Settings
Alarm Mode
No alarm setting
High & Low alarm, 2 alarm ranges determined by 2 alarm limits.
Multiple Alarm ranges, 5 alarm ranges determined by 5 alarm limits.
High alarm zones: A1, A2, A3
Ideal range: A4 (No alarm will be triggered when data falls within this range )
Low alarm zone: A5, A6
▪
Only ITAG4 Bio supports multiple alarm ranges.
Alarm Type
Single Event
Alarm could only be triggered when data over high limit (or under low limit) not less than an alarm
delay continuously.
Cumulative Alarm
Alarm could be triggered once the cumulative total time data over high limit (or under low limit) is
not less than an alarm delay.
