UM-ITAG4-160217 REV.D
RECORDING
Manual Start
Press and hold
Start/Stop
button for
3
seconds to manually active data logger, if logger was set to Start
Delay, then recording would only start after
Start Delay
time passes.
LCD displays “HoLd” while pressing button to activate device, to remind user current button action is
effective and please keep unit recording starts.
Start Delay
Start delay time and a Clock appear on LCD and logger begins
countdown after logger started manually, refresh frequency of countdown
time changes as per remaining delay time, for example, when there is 2
hours left, delay time refreshes each one hour, 59 minutes left, LCD
refreshes each 1 minute. (In this case, start delay time is 30 minutes)
Auto Start
Device starts recording on pre-set time automatically, no need to press
Start/Stop
button after
configuration.
▪
ITAG4 data logger could not be configured again after recording begins.
