UM-ITAG4-160217 REV.D
DATA LOGGER CONFIGURATION
Connect ITAG4 data logger to USB port of PC, open TempCentre software, select
Configure Device
in tool
bar, software would automatically start searching and connecting devices, then user could start programming
of this data logger.
Connect ITAG4 logger to USB port of PC, open Internet Browser, go to
, input and select
configuration parameters you need, then download the configuration profile (.cfg format file), save it into the
logger created removable storage device
“TempSenDisk”.
LCD displays
“USB” when logger connected to PC.
IMPORTANT
Please only apply configuration profile to the same product model on which
configuration file is created based.
Do not alter the configuration profile downloaded to avoid configuration error.
Configuration profile contains time zone information, so please do not use this file in
areas of different time zones, or it will result in incorrect time base.
