1.
Your new logger comes ready to go.
Simply press and hold the button until the green LED lights up to start logging.
2.
Now place your logger in the location you want to monitor.
Once logging, pressing the button will light up an LED to give a quick indication of the
status. It will also add a marker to the data to show that you have checked it.
No alarms will be triggered in the first 30 minutes to allow the logger to settle at the
monitored conditions.
Red + Green single flash
Logger is ready to start new logging session
Push Start / Stop button
Green single flash
The data logger is currently logging
No alarm has been triggered
No action required
Red single flash
The data logger is currently logging
An alarm has been triggered!
Check status in the PDF
Green double flash
The data logger’s memory is full or the logger has been
stopped. No alarm was triggered during the session.
Plug your logger in to a PC and download
the PDF
Red double flash
The data logger’s memory is full or the logger has been
stopped. An alarm was triggered during the session!
Plug your logger in to a PC, download the PDF
and check alarm condition
No LEDs flash
The data logger has a flat battery
Contact your distributor for a new logger
Preset high
and low alarm
levels
Status LEDs
Push to start/stop
Status mark
START
STATUS
MARK
STOP
CHILLED GOODS
EasyLog
www.tiptemp.com
PDF Series
QUICK START GUIDE
START
STATU
S
MARK
STOP
CHILLED GOODS
EasyL
og
START
STATU
S
MARK
STOP
AMBIENT PHARMA
EasyL
og
