2) When two or more frames are used in a row, legs are shared (as shown below). This will occur
whenever the frame ends have cut-outs for electrical pass-thru. When only 2 frames form the
Spine wall, only 1 End of Run frame should have the shared leg mounted prior flipping the frame
over for final leg assembly.
3) When Spine walls of 3 Grid Frames are used the Mid Frames will not have any legs attached to
them. They will use the Shared leg from the End of Run Frames.
4) Spine wall runs of 4 Grid Frames or more will have 1 shared leg attached to each Mid Frame.
(This will be for the 4
th
, 5
th
, etc Mid Frames).