envea STACK 602, User Manual

Page: 11 / 68

STACK 602 9 Maintenance
ENVEA UK Ltd
(PC-000848-MA Issue 5, December 2021)
vii
To achieve optimum performance and safe operation, the equipment must be
operated within the limits detailed in the
Technical Data
section of this manual.
Operation outside these limits can result in damage to the equipment or failure to
achieve the performance specified.
1.5 Additional Information
1.5.1 Product Serial Numbers
The serial number label can be found on the side of the sensor/control unit
enclosure. The serial number on the instrument should match that on the Test
Record Card, which is included with the product documentation.
1.5.2 List of Abbreviations
The following abbreviations and terms are used in this manual:
Abbreviation Meaning
AIM
Auxiliary Input Module*
AOM
Analogue Output Module*
ESP
Electrostatic precipitator
l/min Litres per minute (air purge flow rate)
OD
Outer diameter
PSU Repeater
Power supply unit*
ROM
Relay Output Module*
Rx
Receiver (sensor head)
Tx Transmitter (sensor head)
*ENVEA net module (see
System Options
on page
16
).
1.5.3 Related Documentation
The following literature may be consulted in conjunction with this manual as
applicable. A
Reference Library with supporting information for your instrument is
included with the product documentation.
Included in the Reference Library
 ProController (Control Unit) User Manual (Publication Part Number (PPN):
492027)
 Standard Controller - Control Unit Manual (PPN: PC-000841-MA)

Installation of Network Devices- User Manual (PPN: 492501)
 TN007 Network Cable Lengths (PPN: 491033)
 TN052 Air Purge Guide for
DynamicOpacity
®
Sensors (PPN: 491022)

PC-ME DUST TOOLS Quick Start Guide (PPN: 494003)