Registered in England. Company Registration Number: 10729379 VAT Registration Number: 268 3290 80
P0084EN Rev.03
www.envairlab.co.uk
+44 (0) 1706 228416
4D.
SYMBOLS OF CONTROL BOARD
List and description of all the symbols and controls of the control board:
4
15
11
1
2
3
5
6
7
8
9
10
12
13
14
1 MAIN SWITCH:
Position "OFF"
in the "OFF" position, the green light of the mains voltage is on (4); the LCD
displays the model name. In this position the operator can activate only the
fluorescent light (12), the U.V. lamp (3) and the power outlet (13) (with plug
installed) and can activate the data stored in the microprocessor by
pressing the “Right Arrows” key (9-10).
Position "ON"
Press the key "ON" [1], insert the password using the small numbers in the
right lower corner of the keys and press SET. Default password is 5 [9] – 4
[6]. When the password is typed in the green led of the switch lights up and
the cabinet starts operating, the motor-blower is powered and first "CHECK
PANEL" then "STAND-BY" appears on the display till the air flow reaches the
pre-set value. In addition, an audible alarm will sound intermittently during
this stand-by period, alerting the operator not to start working yet. When
the audible alarm stops and the message "STAND-BY" disappears from the
display. The air velocity is displayed.
NOTE
: In any case, it is advisable to wait 5-10 minutes before starting work.
