-11-
-10-
Table 3 (Setup) :
Table 2.1(Parameters):
Monitor &
Speak
To enable Indoor Monitor under monitoring state
can speak to Door Station at same time.
If set to 1, talk enabled; set to 0, disabled.
Monitor &
Unlock
Ring Numbers
To enable Monitors under monitoring state can
open the door at the same time.If set to 0, unlock
function is disabled; Set to 1, unlock is enable;
Set to 2,unlock is enable and close at once; Set to 3,
unlock is enable and close in 5s.
To show ring times when door station calls monitor.
4 options for choice. If set to 0, ring once. If set to 1,
ring twice. If set to 2, ring three times.
If set to 3,cycle ring.
NameList
Display Mode
To show the namelist display mode.If set to 0,
it's the DT-Config display mode.If set to 1,
it's the Simulate display mode
Working Mode
To show the working mode. If set to 0, it's the
apartment system mode.
If set to 1,it's the villa mode.
Wait Timing
Item
Factory Set
Description
Language
01
03
08
[0]
[88888888]
[1111]
To change language.the code format is 4 digits.
Please refer to part 5,section 10 (change door station
language) for more detail informations.
Item
Factory Set
Description
Monitor Timing
30s
30s
90s
[1]
[1]
[0]
[0]
40s
To show the monitor time, Range from 6s to 600s
Switch Timing
To show the surveillance time for each Door Station
or CCTV camera.Range from 6s to 600s
To show the calling wait time, Range from 10s to 600s
Talk Timing
To show the limitation time of talking, Range from
10s to 600s
Note : This section is set on DT-Config software,for more detail informations, please refer to
the DT-Config software user instructions.
Tone Select
Select the chime of Door Station in calling wait state,
12 chord tunes are available, key in 01 to 12 to select.
Tone Volume
Adjust the tone volume for dooor station in calling.
Range from 01~15
Unlock Code
To change unlock code in Common Code Unlock mode,
in 4-digits format. 1111 is the default unlock code.
Display Mode
To select the Door Station screen menu .If set to 0,
the screen displays the visitor's image when talking.
If set to 1,the screen displays icons when talking.
Clock ...
To set date and time.
Date format:if set to 0,date format is DD/MM/YY,
if set to 1,date format is MM/DD/YY.
Time format: if set to 0, time format is 24 hour
standard.If set to 1,time format is12 hour standard.
Setup Code
To change the Program Code.
About ...
1. Hardware version--To show the Door Station
(including ACS) hardware information
2. Software version--To show the Door Station
(including ACS) software information
3. Manufacture Date--To show the manufacturing date
4. Dialing Counts--To show the call operation counts
5. Calls Counts--To show the established calling counts
6. Unlock Counts--To show the unlock operation counts
7. Standby Voltage--To show the voltage that the door
station in standby.
8. Working Voltage--To show the voltage that the door
station in working.
9. Video Standard--PAL or NTSC standard
10. UI_CODE--To show the UI byte counts and check box
11. MCM-VER--To show the version and language for MCM
12. Updated--To show the updated time for UI
Default ...
Restore all Setup parameters to factory default setting,
Please note that this operation is an irreversible
