Entrematic Ditec DAS107PLUS, User Manual

Page: 22 / 74

IP2270EN
Entrematic Group AB
Lodjursgatan 10
SE-261 44, Landskrona
Sweden
www.entrematic.com
12. Routine maintenance plan (to be carried out
by qualified personnel)
Perform the following operations and checks every 6 months, according to the intensity
of use of the automation.
Without any power supply from the mains or from batteries:
- Clean and lubricate the mobile parts (the carriage slide guides and the floor guides).
- Check the belt tension.
- Clean sensors and photocells.
- Check the stability of the automatic system and make sure that all screws are cor-
rectly tightened.
- Check the correct alignment of the door wings, the position of the end stops, and the
correct triggering of the blocking device (if installed).
After restoring the power supply from the mains or batteries:
- Check the blocking device is working correctly (if installed).
- Check the stability of the automation, and make sure it moves smoothly.
- Check that all control functions are operating correctly.
- Make sure the command and safety sensors are working correctly.
NB: for spare parts, see the spares price list.
i
i
Only use original spare parts when repairing or replacing products.