8
1. Introduction
1.1 General Specifications
1.2 RGP Product Family
1.3 Operati̇ng Condi̇ti̇ons
1. Introduction
1.1 General Specifications
RGP-9/ 9+SVC/ 12/ 12+SVC reactive power factor controller is intended to perform automatic power
power factor correction on three-phase systems. RGP-9/ 9+SVC/ 12/ 12+SVC receives current and
voltage information of each phase to ensure individual power factor correction of phases.
This way, it ensures that the correct power factor correction value is reached even in unstable
systems.
The product is equipped with CR2032 replaceable battery. If you operate the product without a
battery, some data such as the time might, log events and ratios be deleted in case of power failure.
The product is equipped with Wide Screen, Segment LCD and 4 buttons. Functions of the buttons
are shown in Table 4.
** The device with SVC driver has up to 12 steps and an additional SVAR driver.
1.2 RGP Product Family
Product codes and specifications are given in the table.
1.3 Operating Conditions
Ensure that the operating conditions given in the table below are provided to obtain the desired
efficiency from your product.
RG Product Family
Display
9 Steps
12
Steps 9 + SVC
12 +
SVC
SVC
RS-485
(OPS)
RGP-9
Segment LCD
●
RGP-9S
Segment LCD
●
●
RGP-12
Segment LCD
●
RGP-12S
Segment LCD
●
●
RGP-12SR
Segment LCD
●
●
●
Operating Conditions
Value Range
Operating Voltage
100-270 (-15%+10%) VAC/ VDC 85-300
VAC
Operating Frequency
50-60 Hz
Power Consumption
<25VA, <20W
Maximum Measurable Current
6A AC
Maximum Measurable Voltage
400 VAC(LN)
Maximum Number of Steps
12
Communication speed
2400 / 256000 bps
Storage Temperature
-30 / +80°C
Operating Temperature
-20 / +70°C
Maximum Humidity
95% (noncondensing)
Battery
3V CR2032
Table 1: RGP Product Family
Table 2: Operating Conditions