45
3.8 Messages
It is the menu where the alarm messages of the system are stored and where you can later display
these messages. The navigation line gives you the definition of the alarm, the first line on the screen
indicates if the message is an alarm or a warning. The second number in the line below shows the
number of the messages on the system, and the first number shows which message amongst them
you are displaying.
This message shows that any voltage is not connected(Example VLN1). The limit is set vnom/2
(Normally 230/2 115 volt)
This message shows that any phase voltage exceeds the alarm value.
3.8 Messages