5
The RGP Series is the next-generation three-phase reactive power control controllers by ENTES.
With its 9 and 12 steps, it controls the three phases separately and strictly the Cos Φ value of each
phase to user defined value to prevent companies from being subjected to penalty. The product has
separate three phase current and voltage, as well as an RS-485 communication, SVC, Alarm and fan
port.
The product has step out up to 9,9+SVC, 12, 12+SVC and 1 alarm output. Connection diagram is at
the back of the product.
Copyrights of this manual are reserved and it is strictly prohibited to use any part or content of it.
Read this manual before commissioning and operating the RGP Series products by ENTES. The
information given below is important to avoid problems that may emerge during installation and use.
Failure to follow the instructions below may result in serious injuries or even death. In this case, the
manufacturer cannot be held responsible in any manner.
Please contact the manufacturer for all technical notices: [email protected]
!