Enterasys ROAMABOUT RBT-1602, Installation Manual, Page: 47 / 56

RBT-1602 and RBT-1602C Wireless Access Point Installation Guide B-1
B
Technical Specifications
This appendix lists the technical specifications for the Enterasys Networks RBT ‐ 1602 and the
RBT ‐ 1602C access points. Table B ‐ 1 lists the mechanical and compliance specifications. Table B ‐ 2 ,
Table B ‐ 3 , and Table B ‐ 4 list the radio specifications. Table B ‐ 5 lists the MAC address allocation
scheme.
Note: This Listed Accessory is designed and approved to be used only with Enterasys Networks
RoamAbout switch models. The RBT-8110, RBT-8210, and the RBT-8400 wireless switches do not
directly connect to the AP.
Note: The AP radios are disabled by default and can be enabled only by the system administrator
using the RASM management application or the switch’s command-line interface (CLI).
Note: The radio frequency band, operating channels, and transmit power depend on the country of
operation specified by the system administrator using RASM or the switch’s CLI.
Table B-1 AP Mechanical and Compliance Specifications
Specification Description
Size Diameter: 16.76 cm (6.6 inches)
Height: 4.69 cm (1.85 inches)
Weight Without mounting bracket: 0.35 kg (12.5 ounces)
With mounting bracket: 0.40 kg (14 ounces)
Operating Temperature 0° C to +50° C (32° F to 122° F)
Storage Temperature -20° C to +70° C (-4° F to +158° F)
Humidity 10% to 95% noncondensing
Power over Ethernet (PoE) 42 VDC to 57 VDC (46 VDC nominal)
IEEE 802.3af
Status indicators Health/switch and radio LEDs
(For descriptions of the LEDs, see
“Status LEDs” on page 1-3.)
Wired network ports Two RJ-45 ports for 10/100BASE-T Ethernet and Power over Ethernet (PoE)