Enterasys ROAMABOUT RBT-1602, Installation Manual, Page: 32 / 56

Installing the Access Point
2-14 Installing and Connecting the Access Point
9. Install the Kensington lock, if you plan to used one.
a. Loop the Kensington lock’s cable around an object that cannot be moved or damaged by a
person pulling on the cable.
b. Insert the key into the Kensington lock.
c. Insert the Kensington lock into the security slot on the AP.
d. Rotate the key right or left to secure the lock to the AP.
e. Pull on the lock to verify that it is secured to the AP.
f. Remove the key.
10. Lift the access point into place on the universal mounting bracket as shown in Figure 2 ‐ 16 .
Make sure the cable feeds properly into the ceiling as you lift the device, and does not become
trapped between the access point and the bracket.
Figure 2-16 Step 9—Placing the Access Point on the Bracket