Enterasys ROAMABOUT RBT-1602, Installation Manual, Page: 19 / 56

RBT-1602 and RBT-1602C Wireless Access Point Installation Guide 2-1
2
Installing and Connecting the Access Point
Unpacking the Access Point
The shipping carton contains the following items:
• One access point
• Mounting kit:
– One universal mounting bracket (attached to the AP)
– One paper mounting template (used for marking cutting areas and screw holes)
– One two ‐ piece 14.2 ‐ mm (9/16 ‐ inch) T ‐ bar clamp
– One two ‐ piece 15.9 ‐ mm (5/8 ‐ inch) T ‐ bar clamp
– One two ‐ piece 23.9 ‐ mm (15/16 ‐ inch) T ‐ bar clamp
– Two #6 sheet metal screws and two drywall anchors
– Three adhesive rubber feet
• One documentation pack that includes quick mounting instructions and a registration card
(not shown)
Figure 2 ‐ 1 shows the contents of the shipping carton.
For information about... Refer to page...
Unpacking the Access Point 2-1
Installation Requirements and Recommendations 2-2
Installing the Access Point 2-2
Connecting an Access Point to the Network 2-25
Verifying AP Health 2-26
Note: Before installing the RoamAbout Access Point, you might need to generate a network plan
and an AP work order with RASM. (See “ RASM Network Plan and Work Orders ” on page 2-2.)