Hardware Installation
3-1
3
Hardware Installation
This chapter provides the instructions required to install the device. Follow the order of the sections
as listed below to correctly install the device.
•
Unpacking the device (
Section 3.2
)
•
Installing options (
Section 3.3
)
•
Installing the device (on a shelf or tabletop, or into a standard rack) (
Section 3.4
)
•
Connecting to the network (
Section 3.5
)
•
Connecting to console port for local management (
Section 3.6
)
•
Completing the installation (
Section 3.7
)
3.1
REQUIRED TOOLS
A Phillips screwdriver is required to install the device into a rack.
ELECTRICAL HAZARD: Only qualified personnel should install the C1H124-48 and
C1G124-24.
NOTE: Read the Release Notes shipped with the C1H124-48 and C1G124-24 to check
for any exceptions to the supported features and operation documented in this guide.
