Displaying the Unicast Address Table
8-6
Network Monitoring Menu Screens
8.4
DISPLAYING THE UNICAST ADDRESS TABLE
The Unicast Address Table contains the MAC addresses and VLAN identifier associated with each
port (that is, the source port associated with the address and VLAN), sorted by MAC address or
VLAN ID. Using the Unicast Address Table screen (
Figure 8-4
),
you can search for a specific
address, clear the entire address table, or information associated with a specific address, or set the
aging time for deleting inactive entries. The information displayed in the Address Table is
indicated in the following figure and table.
65-127 Byte Frames
The total number of frames (including bad packets) received
and transmitted that were between 65 and 127 octets in
length inclusive (excluding framing bits but including FCS
octets).
128-255 Byte Frames
The total number of packets (including bad packets)
received and transmitted that were between 128 and 255
octets in length inclusive (excluding framing bits but
including FCS octets).
256-511
The total number of packets (including bad packets)
received and transmitted that were between 256 and 511
octets in length inclusive (excluding framing bits but
including FCS octets).
512-1023
The total number of packets (including bad packets)
received and transmitted that were between 512 and 1023
octets in length inclusive (excluding framing bits but
including FCS octets).
1024-1518 Byte Frames
The total number of packets (including bad packets)
received and transmitted that were between 1024 and 1518
octets in length inclusive (excluding framing bits but
including FCS octets).
Refresh Statistics command
Refreshes the screen.
Reset Counters command
Resets all the counters to zero.
Parameter
Description
