Configuring the Serial Port
6-8
Management Setup Menu Screens
6.3
CONFIGURING THE SERIAL PORT
You can access the on-board configuration program by attaching a VT100 compatible device to the
switch’s COM port. (For more information on connecting to this port, refer to
Chapter 2
.) The
communication parameters for this port can be accessed from the Serial Port Configuration screen
(
Figure 6-6
) shown below and described in the following table.
Figure 6-6
Serial Port Configuration Screen
Management Mode
:
CONSOLE MODE
Baud rate
: 9600
Data bits
: 8
Stop bits
: 1
Parity
: NONE
Time-Out (in minutes)
: 10
Auto Refresh (in seconds)
: 5
<SAVE> <RETURN> <CANCEL>
3583_14
