Assigning SNMP Parameters
6-12
Management Setup Menu Screens
6.4.1
Configuring Community Names
The SNMP Communities screen (
Figure 6-8
) is selected from the SNMP Configuration Menu
screen. The table following the figure describes the fields. This screen is used to configure the
community strings authorized for management access. Up to 5 community names may be entered.
Figure 6-8
SNMP Communities Screen
Parameter
Description
Community Name
A community entry authorized for management access.
Maximum string length: 20 characters
Access
Management access is restricted to Read Only or
Read/Write.
Status
Sets administrative status of entry to enabled or disabled.
NOTE:
The default community strings are “public” with Read Only access, and “private”
with Read/Write access.
Community Name
Access
Status
1.
public
READ/WRITE
ENABLED
2.
3.
4.
5.
<SAVE> <RETURN> <CANCEL>
3583_16
