Configuration Guidelines
2-2
Installation Requirements and Specifications
2.2
CONFIGURATION GUIDELINES
The 5C105 has 5 slots that accept interface modules. The slots are numbered 1 to 5 beginning from
the left. There are two additional slots located on the far right of the chassis that are reserved for
power supply modules. These slots are labeled PS1 and PS2. Enterasys Networks’ modules for the
5C105 are equipped with a firmware-based management tool called Local Management, which
provides the capability to configure the module, and access chassis, power supply, and fan tray
information. These modules are also SNMP compliant to allow remote management through
SNMP software such as Aprisma Management Technologies’ SPECTRUM for Open Systems
suite of management products.
2.3
OPERATING SPECIFICATIONS
The following lists the specifications for the 5C105 chassis, 5C405 fan tray and the 5C205-3
power supply. Enterasys Networks reserves the right to change these specifications without notice.
Environment
Operating Temperature:
5°C to 40°C (41°F to 104°F)
Storage Temperature:
-30°C to 73°C (-22°F to 164°F)
Operating Relative Humidity:
5% to 90% (non-condensing)
Regulatory Compliance
Safety:
UL 1950, CSA C22.2 No. 950, 73/23/EEC, EN 60950,
IEC 950, EN 60825
Electromagnetic
Compatibility (EMC):
FCC Part 15, CSA C108.8, 89/336/EEC, EN 55022,
EN 61000-3-2, EN 61000-3-3. EN 55024, AS/NZS 3548,
VCCI V-3
