xi
About This Guide
Welcome to the Enterasys Networks 5C105 MATRIX E5 Overview and Setup Guide. This
guide explains how to set up and configure the Enterasys Networks 5C105 MATRIX E5 chassis.
USING THIS GUIDE
Read through this guide completely to familiarize yourself with its contents and to gain an
understanding of the features and capabilities of the 5C105 MATRIX E5. This guide lists the
features and options of the 5C105 MATRIX E5 and explains how to remove and reinstall the fan
tray, and install the power supply(ies), modules and the cable management bar. A general working
knowledge of data communications networks is helpful when setting up the 5C105 MATRIX E5.
STRUCTURE OF THIS GUIDE
This guide is organized as follows:
This chapter provides preliminary information to aid in using this manual and instructions on how
to get help.
Chapter 1
,
Introduction
, provides information on how this guide is organized, how and where to
get help, and discusses the features and capabilities of the 5C105.
Chapter 2
,
Installation Requirements and Specifications
, lists the location requirements that
must be met before installing the 5C105 in a cabinet or rack. This chapter also includes some
configuration guidelines, environmental guidelines, and operating specifications for the 5C105 and
related Power Supply Modules.
Important Notice
Depending on the firmware version used in the 5C105 MATRIX E5, some features described in
this document may not be supported. Refer to the Release Notes shipped with the 5C105 MATRIX
E5 to determine which features are supported.
NOTE: In this document, the 5C105 MATRIX E5 is referred to as either the “5C105” or
the “chassis”.
