Enterasys 08G20G2-08, Hardware Installation Manual

Page: 17 / 96

Enterasys 800-Series Hardware Installation Guide xv
About This Guide
This guide provides an overview, installation and troubleshooting instructions, and specifications
for the Enterasys 800-Series Fast/Gigabit Ethernet switches.
For information about the Command Line Interface (CLI) set of commands used to configure and
manage the Enterasys 800-Series switches, refer to the
Enterasys 800-Series CLI Reference .
For information about the Web User Interface (Web UI) used to configure and manage the
Enterasys 800-Series switches, refer to the
Enterasys 800-Series Web UI Reference .
This preface provides an overview of this guide and the Enterasys 800-Series manual set, and
explains the symbols used throughout this guide.
Who Should Use This Guide
This guide is intended for a network administrator responsible for installing and setting up the
switches.
How to Use This Guide
Read through this guide completely to familiarize yourself with its contents and gain an
understanding of the features and capabilities of the Ethernet switch. A general knowledge of data
communications networks is helpful when setting up the switch.
This guide provides information about the following:
Related Documents
The following manuals can be obtained from the World Wide Web in Adobe Acrobat Portable
Document Format (PDF) at the following site:
Electrical Hazard:
Only qualified personnel should perform installation procedures.
Riesgo Electrico:
Solamente personal calificado debe realizar procedimientos de instalacion.
Elektrischer Gefahrenhinweis:
Installationen sollten nur durch ausgebildetes und qualifiziertes
Personal vorgenommen werden.
For... Refer to ...
An overview of the 800-Series features. Chapter 1 ,
Introduction
Instructions to install the 800-Series on a flat surface or in a
standard 19-inch rack. Chapter 2 ,
Installation
Troubleshooting installation problems and diagnosing
network/operational problems using the LEDs. Chapter 3 ,
Troubleshooting
Specifications, environmental requirements, and physical
properties of the 800-Series and optional redundant power
supplies. Appendix A ,
Specifications
Temperature, humidity, and airflow guidelines, with dust
mitigation and airborne chemical prevention. Appendix B ,
Environmental Guidelines