20
Entek IRD 6687 Protection Monitor
6687 Monitor
COMM’S submenu
The COMM’S submenu has the following options:
BAUD
PARITY
RESCALE
SCALE
EXIT
MODULE
SET
Factory menu
→
COMM’S
MODULE
Choose the MODBUS serial address for the monitor (1–247). The address
must be unique in the MODBUS network.
BAUD
Choose the speed for serial communications (4800, 9600, 19200, 38400).
PARITY
Choose the parity for serial communications (NONE, EVEN).
RESCALE
Choose the format for data transmission (NO, 16 BIT). Some MODBUS
masters handle data as integer numbers, not floating point format. NO
uses floating point format, while 16 BIT uses integer (unsigned) format.
SCALE
Choose the scale for 16 BIT data transmission (0–65535) if the MODBUS
master uses integer (16 BIT) numbers. This sets the value to transmit for
full scale amplitude. Use the same scale factor as the MODBUS master.
EXIT
Return to the Factory menu. The monitor remembers the current values
for menu options, but does not write them to memory until you exit the
Factory menu.
