16
Entek IRD 6687 Protection Monitor
6687 Monitor
To set the date and time
You change the date and time for the monitor from the User menu.
1.
Use the Up Arrow or Down Arrow button to move the highlight to CLOCK. Press the
SEL button.
2.
The CLOCK submenu appears.
You must select an option from the CLOCK submenu. Move the highlight to HOURS
and press SEL.
3.
Use the Up or Down Arrow buttons to change the current value for the option. If you
press and release an Arrow button, it changes the value by one step. If you press and
hold an Arrow button, it continues to change the value while you hold the button. The
longer you hold the Arrow button, the faster the value changes.
Note that the time is in military (24 hour) clock—it does not use AM or PM.
Press SEL to save the current value for the option, and return to the CLOCK menu.
4.
Note that the highlight moves to the next option in the menu. Repeat the above steps to
change the other options in the CLOCK submenu. Note that the monitor does not set
each of the options to the current date and time before you start. For that reason, you
must make sure all the options are set correctly.
5.
For the CLOCK submenu, you must confirm that you want to change the time and date.
Move the highlight to the SET option and press SEL. Change the setting to YES and
press SEL again.
6.
When done changing options, move the highlight to EXIT and press SEL to exit the
menu. When you exit the submenu for CLOCK, the monitor displays the date and time
for a few seconds before displaying the User menu.
ALARMS
ZRO TX1
ZRO TX2
INHIBIT
EXIT
CLOCK
SET
MINS
SECS
DAY
MONTH
YEAR
SET
EXIT
HOURS
SET
HOURS
12
SETTING
SECS
DAY
MONTH
YEAR
SET
EXIT
MINS
SET
HOURS
