393930-2 Rev 0: 01.04.2020
27 |
P a g e
4.8.10
Software update menu
It is possible to update the software in the air handling unit through the USB
port on the display.
The new software and a USB cable must be available A X-modem capable
software tool must be used
Activate the software update process. Range No, Yes; default No
Once activated, the menu cannot be closed until completion! Duration up to
15 min
Shows status of the upload process.
If active, more menus will show with more detailed information for the
operator
4.8.11
Wi-Fi Connection
The Wi-Fi connection can be used for an app to remotely control and monitor
the air handling unit.
See separate document for this Turn
Wi-Fi radio on or Off
Status if the cloud connection is active
Menu is only visible if Wi-Fi is turned on
IP address of the unit
Menu is only visible if Wi-Fi is turned on
Mac address of the unit
Menu is only visible if Wi-Fi is turned on
SSID of the connected Wi-Fi
Menu is only visible if Wi-Fi is turned on
Commands for the Wi-Fi connection.
On boarding: Activate Bluetooth radio for the app (5 min)
Factory reset: Reset all setting to factory settings
Off: No action
Note: Bluetooth is used for the on-boarding process with the app. Bluetooth
is only active the first 5 minutes after power-on for safety reasons!
Summary of Contents for AHU 200B
