9
installation guide
To install the legs, thread the washer over the bolt of the leg with
the recessed side facing the leg, and tighten by hand.
Do not over tighten.
STEP 1
STEP 2
Always use two people when setting up the base.
With the help of an able-bodied assistant, place the carton on the
floor with the arrows pointing downwards.
Remove the binding straps and packing materials, making sure not
to puncture the box with any sharp objects.
Remove the bed base from the box keeping the bottom of the
base facing upwards.
STEP 3
STEP 4
STEP 5
Uncoil power cord from the control box and
plug into Power Supply.
To install headboard brackets see instructions on page 15.
For customer support, visit www.ergomotion.com or call: 1-844-534-3676
9 inch leg
3 inch leg
6 inch leg
Uncoil the Power Down Box from the frame
and install (2) 9 Volt batteries- not included.
Place box on the ground. Ensure that it is
easily accessible when the base is turned to
its upright position.
If installing a Divided King Base, please refer to the KD Install Guide.
