Page 40 of 56
EN109-1498740-40 IFU
Programming a sequential protocol (multi-
step-programming)
A sequential protocol consists of a series of
treatment steps that are executed in a sequence
until the end of the protocol is reached.
•
Select Multi-step Programming in the
TENS/NMES/PENS menu.
•
Set the desired parameters.
•
When a treatment screen is completely set
as required, touch the
“next” button to
add a next step (touch the
“
back
”
to go
back one step).
•
Continue with the remaining treatment
steps until you have reached the end of
your protocol.
•
Touch the Store button in the navigation
bar.
•
Enter the name of your sequential
protocol and press the accept button
✓
in
the navigation bar to save your Favorite.
Sequential protocols are stored under the
Favorite menu.
•
To start your sequential protocol go to the
Favorite menu and select your Favorite.
