SYSTEM MATERIALS AND PARTS LIST
Failure to remove foam packing material from between compressor
and housing will result of overheating of the compressor.
Verify that the following was received:
Rectangular Compressor Enclosure:
The rectangular compressor enclosure constructed of stainless steel
provides a lifetime of rust and corrosion protection. This innovative design
extends the life of the compressor and its components because of the
superior cooling capabilities. The enclosure is assembled complete with
the compressor, air intake filter, cooling fan and air discharge hose.
Diffusers with Single Round Hollow Base and Vent Plug:
Note quantity of diffuser stations should match system ordered, example:
Solar AquaAir® 1 Ultra should have 1 diffuser station.
Diffusers will be 9":
1. Single 9” diameter membrane flexible
diffuser disc for higher fouling resistance.
Selected Length of Weighted Super Sink Air Discharge Tubing:
Used to supply air from the compressor enclosure on shore, along the
lake bottom to the diffuser. Additional lengths connect with PVC insert
fittings and PVC glue. Heavy, .275”, wall thickness provides protection
from puncture or kinking.
Parts:
Stainless steel hose clamps, one for each diffuser and for each
compressor brass hose barbs or insert fittings. Also included is one PVC
insert fitting per 100 feet of Super Sink tubing.
Solar Panels:
Used to supply power to the Solar AquaAir system. Will contain one (1)
Solar AquaAir Ultra 1 or two (2) Solar AquaAir Ultra 2 panels
Batteries:
Sealed Lead Acid batteries provide backup power for continuous
operation. Will contain two (2) Solar AquaAir 1 or four (4) Solar AquaAir
Ultra 2 batteries
Page 3
