31
Copyright Enphase Energy Inc. 2010
141-00010 Rev 01
Comfort Settings
The Comfort Settings on the Environ allow you to maintain consistent
comfort with the highest levels of temperature control precision,
accuracy and energy efficiency.
HVAC CYCLING
: This feature allows you to set the desired
variance in temperature between the Environ setting and the
room temperature required before the heating or cooling system
will turn on—from 0.5° to 2.0° F (.25° to 1° C).
For example, if HVAC CYCLING is set to 2.0° F and the Environ
is set to 70°F, the heat cycle will not activate until the room
temperature drops to 68°. Similarly, the cooling system will not
activate until the room temperature increases to 72°F. The
HVAC shuts off at the target.
To set/adjust HVAC CYCLING:
1.
Press Menu and then press
COMFORT
.
2.
Press the temp offset setting.
3.
Use the
+
/
-
buttons to raise or lower the variance
setting—from 0.5° to 2.0° F.
4.
Press
HOME
to return to the Home screen.
2ND STAGE ON AT
: This feature allows you to adjust the
settings that control second stage heating and cooling
depending upon the climate you live in. This can be modified for
maximum efficiency or comfort. It is displayed if you have
configured a multistage system in HVAC SET-UP.
To set/adjust 2ND STAGE ON AT:
1.
Press
Menu
and then press
COMFORT
.
2.
Press and highlight the user setting (next to 2ND STAGE
ON AT).
3.
Use the
+
/
-
buttons to raise or lower the setting from
2.0° to 4.5°F (1° to 2.5° C).
4.
Press
HOME
to return to the Home screen.
