27
Copyright Enphase Energy Inc. 2010
141-00010 Rev 01
Home Screen
The
Home
screen displays when the
unit is operating. Pressing the green
HOME icon
on the control bar will
always return you to this screen.
To set a Mode:
Press the
Power
icon
on the
control bar. Press the desired mode
from the choices displayed at the
bottom
COOL
,
HEAT
,
AUTO
, or
OFF
. Press
HOME
when done.
Set the time by pressing the hour or minute and the
+
/
-
buttons to change.
Your Environ is now controlling your
HVAC.
Manual Screen
The
Manual Screen
control screen
is where you can make temporary
changes to your Environ’s operation.
The Environ has 6 manual override
commands. These are accessed by
pressing the
+
/
-
buttons or pressing
the current temperature on the
HOME screen.
Temporary OVERRIDE -
Ȉ
Press the
+
/
-
buttons
to select your desired temporary Target Temperature.
Ȉ
Press
HOME
to return to operation.
The
TEMPORARY
icon will display indicating you have modified the
Target Temperature for the current Time Slot only.
Hold -
This will hold the target temperature you set indefinitely, until
you turn it off. Take care using the
HOLD
function. To set a hold,
press
HOLD
to initiate a hold temperature. You can use the +/-
