BIOS, Driver & Utility Guide
39
FLASH BIOS PROGRAMMING UTILITY
Updating the Award BIOS Code is made easy with the AWDFLASH Utility found
under the “Utilities” folder of the supplied CD-ROM. Since this mainboard
features FLASH BIOS, it is not necessary to change the actual BIOS chip in order
to upgrade the System BIOS. The user can simply re-program the old BIOS using
the AWDFLASH Utility as follows:
1. First, boot the system with DOS or to “Safe Mode” under Windows 95. If you
are booting DOS from a hard drive or floppy disk, press [F5] when the message
“Starting MS-DOS…” appears on the screen. If you are booting Windows 95,
press the [F8] key, and select the “Safe mode command prompt” option. This
will assure that the system is running in
“
real mode
”
with
no device drivers
loaded
.
This is the only correct way to run the AWDFLASH Utility program.
2. There are (2) important files needed to re-program the BIOS. The first is
“AWDFLASH.EXE” which is the FLASH BIOS Programming Utility. The
second file needed is the updated “BIN” file which contains the actual BIOS
code. This file will have the extension [.bin], such as “P598GH.BIN”. Make
sure these files are on the diskette or hard drive in the same directory.
3. Start the AWDFLASH Utility by changing to the directory where the two
required files exist and typing: AWDFLASH and pressing [ENTER].
4. The AWDFLASH Utility Screen appears. You will be asked for the file name to
program. Type in the name of the new BIOS (.bin) file and hit [ENTER].