MAINBOARD BIOS SETUP
BIOS, Driver & Utility Guide
20
PCI/VGA Act- Monitor
-
When enabled, the video detect logic will generate a
timer reload event for device monitor 11.
Soft-Off by PWR-BTTN
- With
Instant-Off
selected, the ATX switch functions
like a normal system power off button. With
Delay 4 Sec.
selected, you must hold
down the ATX switch for more than 4 seconds to power off the system.
Power On by Ring/LAN
–
An input signal on the serial Ring Indicator (RI) line
(in other words, an incoming call on the modem power on the system or return it to
full power out of suspend / standby mode. With a LAN card installed, the Wake-up
On LAN function allows the network to wake up a Soft Power Down (Soft-Off) PC.
Power On by RTC Alarm
-
When enabled, the system will automatically power
on or returns to full power out of suspend/standby mode at the time and date of the
month (0 for daily) specified.
IRQ 8 Break Suspend
-
When
IRQ 8 Clock Event
is enabled, the unmasked IRQ8
will generate a Fast Burst Timer reload or stop break event.
ACPI Suspend Type
– Determines the ACPI defined suspend type.
Suspend
Type
Power Consumption
S1 (POS)
State 1 (Power On Suspend) - below 30W
CPU is not working through STPCLK#, while the power is still provided for
the whole system.
S3 (STR)
State 3 (Suspend to RAM) - Less than 10W
Power is provided only to DRAM and wake-up devices circuit, while the rest
of the system is powered off.
** Reload Global Timer Events **
IRQ[3-7, 9-15], NMI: Enable an unmasked IRQ [3-7, 9-15], NMI, when asserted,
reload the Global Standby Timer.
Primary/Secondary IDE 0/1, Floppy Disk, Serial Port, Parallel Port: Enable reload
events from the respective device monitor to reload the Global Standby Timer.
