INSTALLATION
Installation Guide
18
Wake-up On LAN Connector (J12)
The Wake-up On LAN function will
allow the network to wake up a Soft
Power Down (Soft-Off) PC. However, if
your system is in the Suspend mode, you
can wake-up the system only through an
IRQ or DMA interrupt. To use the
Wake-up On LAN function, you must
enable the “Power On By Ring/LAN”
field in the Power Management Setup of
the Award BIOS. Connect the cable that
comes with your LAN card to this
connector on the system board. Refer to
the add-in card’s manual for details.
Note: Your LAN card must support
Magic Packet in order to use the Wake-
up On LAN function.
SB-Link (JP11)
Connect SB-Link cable on the
Creative Sound Blaster Card to this
connector. This PC to PCI bridge
provides backward compatibility
between PCI and ISA audio chips
for earlier DOS games.
1
2
5
6
