background image

INTRODUCTION

 

Installation Guide

 

5

Remark: 

Suspend to RAM

 is a sleep state specified by the ACPI specification. It’s the ideal sleep 

state for the Instantly Available PC. In this state over 95% of the PC’s power is shut off 
enabling a breakthrough in power savings, and the resume time is only a few seconds. 

The 

XStore Pro IDE Driver

 enhances memory management by working with the 

Windows 95/98 operating system, resulting in higher system performance by 
implementing "read-ahead caching after seeking". This is especially effective with 
the large block sizes of modern hard disks. 

PC-cillin anti-virus software

 provides a powerful defense against viruses to 

protect data integration. 

 

 

Package Checklist 

Your mainboard package should include the items listed below. Damaged or 
missing items should be reported to your vendor.  

þ 

The mainboard 
with CPU Retention 
Mechanism attached 

þ 

Floppy disk ribbon cable 

þ 

IDE ribbon cable 

þ 

This Installation Guide 

þ 

BIOS, Driver & Utility 
Guide 

þ 

CD-ROM containing the following 
support software:  
(The latest drivers can always be found 
at their respective web sites.) 

§ 

Intel IDE Bus Master driver,  
http://support.intel.com/support/chipsets 

§ 

Support software for updating the 
FLASH BIOS 

§ 

HighPoint® XStore Pro IDE Bus 
Master 

http://www.highpoint-tech.com

  

§ 

Trend ® PC-cillin Anti-Virus software 

http://www.antivirus.com

  

§ 

ESS Solo-1 drivers 

http://www.esstech.com

  

 

Summary of Contents for EP-KE23










































































Reviews: